Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CP 600r rlease 5, RJ45 adapter

Status
Not open for further replies.

kondalisa

MIS
Dec 21, 2008
75
Hi,Hi it is CS1000M/81 rls 5.5. I got a new 600r rls 5 server hardware, it has RJ45 connector DS30 on it, i How can i connect server with MGATE card?? in previous hardware there was a 25 pinn D type connector through we connect to MGATE card. I was reading a bulletin regarding CallPilot MPB96 and MGate Updates – New MGate RJ45 to Amphenol Adapter.
I used that adapter and connect it to back plane connector of MGATE card and then used a straight cable to connect that adapter with CP server DS30. After booting callpilot all services are up but i couldn't heard any greeting. I then disconnected straight cable and plugged it into front RJ45 connector available on MGATE card and rebooted CP server. I got my all greeting working OK now. Is this the correct procedure of connecting MGATE card with CP server (i mean connecting RJ45 straight cable to MGATE front RJ45 socket and to other end with CP server DS30 socket)??

What is the purpose of RJ45 adapter which connects to back plane of MGATE cards and why don't i heard any greeting if i use it? even callpilot shows UP. Do i also have to change rare emphenol connector also to get that adapter working.

can somebody point exact connectivity of new RJ45 adaptor in a large system? i mean do i have to change rare emphenol connector as we use to change in old CP 201i and then use new RJ45 adapter with straight cable.

Regards


 
Hi Kondalisa
You have to use the RJ45 port in the front of the card. And then the rest is the same as meridian agents 2008.
 
Hi dave, thats OK, i m using this RJ45 port now, but there is a Nortel bulletin regarding using of Emphenol to RJ45 adaptor, How do i use this adaptor to connect MGATE card with CP server 600r??
Can somebody point exact connectivity of new RJ45 adaptor in a large system? i mean do i have to change rare emphenol connector as we use to change in old CP 201i and then use new RJ45 adapter with straight cable.
 
That is for the old style MGATE cards that don't have the RJ45 connection in the front.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top