Coverage Buttons 1

[PhoneTechMan]

I'm checking out the button programming on a 28 button set, and I notice that some of the primary coverage buttons are suffixed with an I & D. Does this distingish between different types of coverage?

 

[GoKings]

No...The 'I' and the 'D' distinguish the ring-type. The 'I' is immediate ring. The 'D' is delay-ring (starts ringing on the 3rd ring usually). There is one other...'N' stands for no-ring.

 

[PhoneTechMan]

Thanks for the reply, where do you change it in programming

 

[Ghostin]

you toggle the ringing on and off the same way you do lines, using the *35,36,37 commands.

 

[PhoneTechMan]

I should have said where do I find it in WinSPM as I'm doing this remotely.

 

[guestworks]

Go to System Programming,
Start,
More,
Cntr-Prg,
Program Ext,
Enter extension,
Select Button (eg-PrmryCov 100-I),
ListFeature,
More,
More,
More,
RingOptions,
One Line,
Enter,
Select Ring Type you want,(No, Delay or Immed Ring)
Enter.

You are done!

 

[PhoneTechMan]

Beautiful!! This is exactly what I was looking for. Thank you all for your answers.

 

[jinxs]

or you could just skip everything from list feature on down by pressing *35 for no ring *36 for delayed or *37 for immediate. Just a short cut..either will work.