Count of used TN's in an Option 81? 2

[Section31]

Good afternoon,

This should be an easy one for you seasoned pros, so here goes:

What is the easiest way to count the number of used TN's, whether it be for trunking, sets, or whatever in an Option 81 system?

Thanks in advance!

 

[johnpoole]

you can't get a count, but you can get a list, ld 20
luvu type=2000 or 500, and their is no way to even get a list for analog trunks

john poole
bellsouth business
columbia,sc

 

[Nortellian]

go to ld 20 and do a change on any digital set. Doesn't matter what kind of change just nul a key or something. After you enter through a whole bunch of info will be printed on your screen. This info will show the number of used TN's.

 

[techman3030]

goto ld 21 and do a
REQ: LTM
enter through the rest and this will give your all of your trunks TNS and route info.

 

[johnpoole]

you can get used analog tn's in 10 used digital tn's in 11 and used trunks in 14... you can get a total in load 81 req=cnt (or lst for list) feat=sets.. the earlier post was for unused tn's (ports not lic)

john poole
bellsouth business
columbia,sc

 

[PERRYPJ]

ld 22
req=slt

OLD ROLMEN WORKING ON NORTELS

 

[johnpoole]

thanks perry it's been about 20 years since i used that prompt..

john poole
bellsouth business
columbia,sc