Hi!
I have a problem.Lets figure..A teminal with W95 can't do ping to 192.168.1.1 (router address), this terminal is conected to 3com 10/100 switch (SW1), which is conected in cascade to another 3com 10/100 switch(SW2), and this serves the novell 4.11 server.This switch receives data from a 3com office connect hub, which receive data from a router (192.168.1.1).The configuration is as i explained bellow.The problem is i can't do ping to router from the terminal.If i unplug the hub and connect the router to swith(SW1) the terminal works fine (sees router). Where could be the problem? In the hub location? Need to be in other place? Any suggest is welcomed
I have a problem.Lets figure..A teminal with W95 can't do ping to 192.168.1.1 (router address), this terminal is conected to 3com 10/100 switch (SW1), which is conected in cascade to another 3com 10/100 switch(SW2), and this serves the novell 4.11 server.This switch receives data from a 3com office connect hub, which receive data from a router (192.168.1.1).The configuration is as i explained bellow.The problem is i can't do ping to router from the terminal.If i unplug the hub and connect the router to swith(SW1) the terminal works fine (sees router). Where could be the problem? In the hub location? Need to be in other place? Any suggest is welcomed