Guest_imported
New member
- Jan 1, 1970
- 0
I have loaded the TCPIP stack into Netware 3.12 and try to log on to the server using my workstation that purely running with IP only. Is there a way to do it?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Could I login Netware 3.12 purely using TCPIP?
- Thread starter Guest_imported
- Start date
- Status
TheBoySmith
Technical User
NO.
Only Netware 5.0 and above supports pure IP.
To get IP on previous versions you have to use Netware IP. This is encapsulated IP.
The tcpip stack you have allows services like Groupwise etc. Lee Smith
Associated Network Services
Snr Systems Engineer
Lee.Smith@ANSPLC.Com
Only Netware 5.0 and above supports pure IP.
To get IP on previous versions you have to use Netware IP. This is encapsulated IP.
The tcpip stack you have allows services like Groupwise etc. Lee Smith
Associated Network Services
Snr Systems Engineer
Lee.Smith@ANSPLC.Com
salserocito
MIS
I know that you can run NWIP (NetWareIP) in a Nw4.x environment. I'm not sure about 3.x, though.
But either way, be prepared, it can be a beast. You can find more info about it on the Novell Website...
Good Luck!
But either way, be prepared, it can be a beast. You can find more info about it on the Novell Website...
Good Luck!
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question