COTS server with SIP Signaling Gateway on IBM X306m

[msfh]

Dear all
I have CS 1000 release 5.5. I am trying to install COTS server with SIP Signaling Gateway on IBM X306m. I follow the instruction on the manual (Communication Server 1000E SIP Line Service for Release 5.5) to install the system. I download the signaling server software file from Nortel site, the name of the file I download it is (SSISP1100_55012_iso). I follow the instruction on the mkboot folder to create the bootable disk after formatting the disk I face the following problem:
Failed to copy BOOTRAM.sys!
Pls fined the attached snap shout for the for the error I receive when I create the startup disk. So I cant create the CD software.
The mkboot folder contain the following files:
Boot.cat
Boot.img
Bootorig.img
Cdrom.bin
Mkboot.bat
N
Nvram.sys
Vxsys.com
Pls advice me.

 

[bignose21]

When you got the sig server it should have come with a CD (Orange) thats all you need should say something like Sig Server Application (COTS Drivers) on it. The software you are downloading says it is for ISP1100 sig server (but I couldn't see a COTs version for download).

If you were going to use that file (SSISP1100_55012_iso) you just burn the ISO to cd and shot it in the drive.