Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Costed BOM issues

Status
Not open for further replies.

itcmerlin

Technical User
Sep 26, 2007
35
US
We have a component (2 part potting compound) that comes in 200ml cartridges.

In Item master we have it listed as purchased as EA and we Stock, Sell and Manufacture in ML. For purchasing we have the Stock Ratio Conversion as 200. So when we order 100 Cartridges, QOH should be 20,000ML.

On the BOM we use a quantity of 10ML.

When run a costed BOM it costs this component as if we are using 10 cartridges instead of 10ML.

We have our wire set up this same way and it doesn't seem to be an issue. Just with this potting compound.

Any ideas as to what I am doing wrong?

TIA
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top