COS of CCM

[ccmuser]

Any one know how to manually set COS values coming from a CCM for RTP and CONTROL traffic.. I see the option to turn on 802.1p on interface.. but do not see how to mark diff types of packets.

I Know how to override this on the switch .. just looking for doc on how to set directly on CCM

Thanks

 

[congogrey]

Here is a document that outlines QOS with CCM:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801ffe28.shtm

"For every complex problem, there is a solution that is simple, neat and wrong" -- H.L. Mencken

 

[ccmuser]

thats a dead file. is it in another location?

 

[congogrey]

Sorry i forgot the l at the end:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801ffe28.shtml

"For every complex problem, there is a solution that is simple, neat and wrong" -- H.L. Mencken

 

[ccmuser]

All I see on this doc. is the port ranges.. No details on call manager on how to set COS values.

HELP PLEASE!!!!!

 

[scaine]

In CM3.3.3, there are configurable settings in Service/Service Parameters in the Cluster Wide Parameters (System - QOS) section.

However, these are only meant to be changed by Cisco TAC engineers in general.

However, if you have a test environment, you may want to experiment.

 

[ccmuser]

Not to sound like an unthankful but those are only for TOS and prec. values.. I guess i will resort to a tac call....