Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Correct Upgrade Path for PIX

Status
Not open for further replies.

quazimotto

Programmer
Mar 29, 2008
755
US
Greetings!

Can I upgrade a PIX 515e from6.3(1) to 7.22 straight away?

Thanks/Quaz
 
Iggsterman,

It is ambiguous to me. Is cisco saying I can go to 7.22 from 6.3? Their example uses 7.0.

Thank you for your response.

Quaz
 
Yes, they use 7.0(1) as the example. Upgrade your PIX to 6.3(5) first. Then correct path should be 6.3(5) - 7.0(1) - 7.1(2) - 7.2(3). Make sure you read the Requirements section carefully.
 
Thank you, Igg. While I have your attention could you help me out with a CLI string for a PIX to allow a computer to ping thru a vpn thru a pix and the machines inside?

Thanks/Quaz
 
Igg,

One more thing. How high does PIX software go?

Quaz
 
PIX can go to up to 8.0(4)32. PDM goes to 6.1 (not sure the build number).
As for pinging though the VPN you should be able to, as long as the tunnel is configured and you are routing properly between the machines.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top