Corporate Directory CS1000 Rel 6

[zordqaz]

First of all when you have the directory file ready,
then you need to copy the directory file in .CSV format (order columns as follow: Lastname, FirstName, DN, Department) use sftp to copy the .CSV File to the CM directory where you can find it,

login to ucm
cslogin
login XXUserXX
PASS? XXXXXXXX

Now press Ctrl+p+d+t ------------to enter PDT mode
Username: xxxxxUsersxx
Password: XXXXXXXX

1)
cd /u/db/
ls -----------------!See if the file cpdir.csv is present
rm cpdir.csv
ls
!See if the file was removed
symload
INIT_CORP_DIR
UPDATE_CORP_DIR
Check on phones, directory should be down.

2)
cd /cf2 ----------------- CF could be any CF0, CF1, CF2........
ls
!See if the new .CSV file is there
cp XXXXX.csv /u/db/cpdir.csv
cd /u/db/
ls ------to See if the file cpdir.csv was copied.
symload
INIT_CORP_DIR
UPDATE_CORP_DIR
Check on phones, directory should be Ready!


-----------------------------------------------------------------------------------------------------------------------------------------


.ZQ

 

[Firebird Scrambler]

I have this old guide that you might like to look at.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley