Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CORE_DUMP & init

Status
Not open for further replies.
amins

amins

Technical User
Jan 17, 2002
40
BE
Hi everyone, i am running aix 5300-04 and received the following core dump sporadically but always at the same time. Can anyone figure out what causes this problem.


LABEL: CORE_DUMP
IDENTIFIER: A63BEB70

Date/Time: Wed Mar 7 15:22:21 NFT 2007
Sequence Number: 23101
Machine Id: 00CDC84C4C00
Node Id: UDWH01
Class: S
Type: PERM
Resource Name: SYSPROC

Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED

Probable Causes
SOFTWARE PROGRAM

User Causes
USER GENERATED SIGNAL

Recommended Actions
CORRECT THEN RETRY

Failure Causes
SOFTWARE PROGRAM

Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE

Detail Data
SIGNAL NUMBER
11
USER'S PROCESS ID:
2244722
FILE SYSTEM SERIAL NUMBER
1
INODE NUMBER
2
PROCESSOR ID
2
CORE FILE NAME
/core
PROGRAM NAME
init
STACK EXECUTION DISABLED
0
ADDITIONAL INFORMATION
strcpy 8C
execcmd 158
respawn 230
spawn 1B4
main 750
__start 8C

Symptom Data
REPORTABLE
1
INTERNAL ERROR
1
SYMPTOM CODE
PIDS/5765E6200 LVLS/520 PCSS/SPI2 FLDS/init SIG/11 FLDS/strcpy VALU/8c FLDS/respawn
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: A63BEB70

Date/Time: Wed Mar 7 15:22:21 NFT 2007
Sequence Number: 23100
Machine Id: 00CDC84C4C00
Node Id: UDWH01
Class: S
Type: PERM
Resource Name: SYSPROC

Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED

Probable Causes
SOFTWARE PROGRAM

User Causes
USER GENERATED SIGNAL

Recommended Actions
CORRECT THEN RETRY

Failure Causes
SOFTWARE PROGRAM

Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE

Detail Data
SIGNAL NUMBER
11
USER'S PROCESS ID:
2244720
FILE SYSTEM SERIAL NUMBER
1
INODE NUMBER
2
PROCESSOR ID
2
CORE FILE NAME
/core
PROGRAM NAME
init
STACK EXECUTION DISABLED
0
ADDITIONAL INFORMATION
strcpy 8C
execcmd 158
respawn 230
spawn 1B4
main 750
__start 8C

Symptom Data
REPORTABLE
1
INTERNAL ERROR
1
SYMPTOM CODE
PIDS/5765E6200 LVLS/520 PCSS/SPI2 FLDS/init SIG/11 FLDS/strcpy VALU/8c FLDS/respawn
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: A63BEB70

Date/Time: Wed Mar 7 15:22:21 NFT 2007
Sequence Number: 23099
Machine Id: 00CDC84C4C00
Node Id: UDWH01
Class: S
Type: PERM
Resource Name: SYSPROC

Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED

Probable Causes
SOFTWARE PROGRAM

User Causes
USER GENERATED SIGNAL

Recommended Actions
CORRECT THEN RETRY

Failure Causes
SOFTWARE PROGRAM

Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE

Detail Data
SIGNAL NUMBER
11
USER'S PROCESS ID:
2244718
FILE SYSTEM SERIAL NUMBER
1
INODE NUMBER
2
PROCESSOR ID
2
CORE FILE NAME
/core
PROGRAM NAME
init
STACK EXECUTION DISABLED
0
ADDITIONAL INFORMATION
strcpy 8C
execcmd 158
respawn 230
spawn 1B4
main 750
__start 8C

Symptom Data
REPORTABLE
1
INTERNAL ERROR
1
SYMPTOM CODE
PIDS/5765E6200 LVLS/520 PCSS/SPI2 FLDS/init SIG/11 FLDS/strcpy VALU/8c FLDS/respawn
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: A63BEB70

Date/Time: Wed Mar 7 15:22:21 NFT 2007
Sequence Number: 23098
Machine Id: 00CDC84C4C00
Node Id: UDWH01
Class: S
Type: PERM
Resource Name: SYSPROC

Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED

Probable Causes
SOFTWARE PROGRAM

User Causes
USER GENERATED SIGNAL

Recommended Actions
CORRECT THEN RETRY

Failure Causes
SOFTWARE PROGRAM

Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE

Detail Data
SIGNAL NUMBER
11
USER'S PROCESS ID:
2244716
FILE SYSTEM SERIAL NUMBER
1
INODE NUMBER
2
PROCESSOR ID
2
CORE FILE NAME
/core
PROGRAM NAME
init
STACK EXECUTION DISABLED
0
ADDITIONAL INFORMATION
strcpy 8C
execcmd 158
respawn 230
spawn 1B4
main 750
__start 8C

Symptom Data
REPORTABLE
1
INTERNAL ERROR
1
SYMPTOM CODE
PIDS/5765E6200 LVLS/520 PCSS/SPI2 FLDS/init SIG/11 FLDS/strcpy VALU/8c FLDS/respawn
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: A63BEB70

Date/Time: Wed Mar 7 15:22:21 NFT 2007
Sequence Number: 23097
Machine Id: 00CDC84C4C00
Node Id: UDWH01
Class: S
Type: PERM
Resource Name: SYSPROC

Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED

Probable Causes
SOFTWARE PROGRAM

User Causes
USER GENERATED SIGNAL

Recommended Actions
CORRECT THEN RETRY

Failure Causes
SOFTWARE PROGRAM

Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE

Detail Data
SIGNAL NUMBER
11
USER'S PROCESS ID:
2244714
FILE SYSTEM SERIAL NUMBER
1
INODE NUMBER
2
PROCESSOR ID
2
CORE FILE NAME
/core
PROGRAM NAME
init
STACK EXECUTION DISABLED
0
ADDITIONAL INFORMATION
strcpy 8C
execcmd 158
respawn 230
spawn 1B4
main 750
__start 8C

Symptom Data
REPORTABLE
1
INTERNAL ERROR
1
SYMPTOM CODE
PIDS/5765E6200 LVLS/520 PCSS/SPI2 FLDS/init SIG/11 FLDS/strcpy VALU/8c FLDS/respawn
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: A63BEB70

Date/Time: Wed Mar 7 15:22:21 NFT 2007
Sequence Number: 23096
Machine Id: 00CDC84C4C00
Node Id: UDWH01
Class: S
Type: PERM
Resource Name: SYSPROC

Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED

Probable Causes
SOFTWARE PROGRAM

User Causes
USER GENERATED SIGNAL

Recommended Actions
CORRECT THEN RETRY

Failure Causes
SOFTWARE PROGRAM

Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE

Detail Data
SIGNAL NUMBER
11
USER'S PROCESS ID:
2244712
FILE SYSTEM SERIAL NUMBER
1
INODE NUMBER
2
PROCESSOR ID
2
CORE FILE NAME
/core
PROGRAM NAME
init
STACK EXECUTION DISABLED
0
ADDITIONAL INFORMATION
strcpy 8C
execcmd 158
respawn 230
spawn 1B4
main 750
__start 8C

Symptom Data
REPORTABLE
1
INTERNAL ERROR
1
SYMPTOM CODE
PIDS/5765E6200 LVLS/520 PCSS/SPI2 FLDS/init SIG/11 FLDS/strcpy VALU/8c FLDS/respawn
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: A63BEB70

Date/Time: Wed Mar 7 15:22:21 NFT 2007
Sequence Number: 23095
Machine Id: 00CDC84C4C00
Node Id: UDWH01
Class: S
Type: PERM
Resource Name: SYSPROC

Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED

Probable Causes
SOFTWARE PROGRAM

User Causes
USER GENERATED SIGNAL

Recommended Actions
CORRECT THEN RETRY

Failure Causes
SOFTWARE PROGRAM

Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE

Detail Data
SIGNAL NUMBER
11
USER'S PROCESS ID:
1228982
FILE SYSTEM SERIAL NUMBER
1
INODE NUMBER
2
PROCESSOR ID
0
CORE FILE NAME
/core
PROGRAM NAME
init
STACK EXECUTION DISABLED
0
ADDITIONAL INFORMATION
strcpy 8C
execcmd 158
respawn 230
spawn 1B4
main 750
__start 8C

Symptom Data
REPORTABLE
1
INTERNAL ERROR
1
SYMPTOM CODE
PIDS/5765E6200 LVLS/520 PCSS/SPI2 FLDS/init SIG/11 FLDS/strcpy VALU/8c FLDS/respawn
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: A63BEB70

Date/Time: Wed Mar 7 15:22:21 NFT 2007
Sequence Number: 23094
Machine Id: 00CDC84C4C00
Node Id: UDWH01
Class: S
Type: PERM
Resource Name: SYSPROC

Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED

Probable Causes
SOFTWARE PROGRAM

User Causes
USER GENERATED SIGNAL

Recommended Actions
CORRECT THEN RETRY

Failure Causes
SOFTWARE PROGRAM

Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE

Detail Data
SIGNAL NUMBER
11
USER'S PROCESS ID:
1228980
FILE SYSTEM SERIAL NUMBER
1
INODE NUMBER
2
PROCESSOR ID
0
CORE FILE NAME
/core
PROGRAM NAME
init
STACK EXECUTION DISABLED
0
ADDITIONAL INFORMATION
strcpy 8C
execcmd 158
respawn 230
spawn 1B4
main 750
__start 8C

Symptom Data
REPORTABLE
1
INTERNAL ERROR
1
SYMPTOM CODE
PIDS/5765E6200 LVLS/520 PCSS/SPI2 FLDS/init SIG/11 FLDS/strcpy VALU/8c FLDS/respawn
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: A63BEB70

Date/Time: Wed Mar 7 15:22:21 NFT 2007
Sequence Number: 23093
Machine Id: 00CDC84C4C00
Node Id: UDWH01
Class: S
Type: PERM
Resource Name: SYSPROC

Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED

Probable Causes
SOFTWARE PROGRAM

User Causes
USER GENERATED SIGNAL

Recommended Actions
CORRECT THEN RETRY

Failure Causes
SOFTWARE PROGRAM

Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE

Detail Data
SIGNAL NUMBER
11
USER'S PROCESS ID:
1228978
FILE SYSTEM SERIAL NUMBER
1
INODE NUMBER
2
PROCESSOR ID
0
CORE FILE NAME
/core
PROGRAM NAME
init
STACK EXECUTION DISABLED
0
ADDITIONAL INFORMATION
strcpy 8C
execcmd 158
respawn 230
spawn 1B4
main 750
__start 8C

Symptom Data
REPORTABLE
1
INTERNAL ERROR
1
SYMPTOM CODE
PIDS/5765E6200 LVLS/520 PCSS/SPI2 FLDS/init SIG/11 FLDS/strcpy VALU/8c FLDS/respawn
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: A63BEB70

Date/Time: Wed Mar 7 15:22:21 NFT 2007
Sequence Number: 23092
Machine Id: 00CDC84C4C00
Node Id: UDWH01
Class: S
Type: PERM
Resource Name: SYSPROC

Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED

Probable Causes
SOFTWARE PROGRAM

User Causes
USER GENERATED SIGNAL

Recommended Actions
CORRECT THEN RETRY

Failure Causes
SOFTWARE PROGRAM

Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE

Detail Data
SIGNAL NUMBER
11
USER'S PROCESS ID:
1228976
FILE SYSTEM SERIAL NUMBER
1
INODE NUMBER
2
PROCESSOR ID
0
CORE FILE NAME
/core
PROGRAM NAME
init
STACK EXECUTION DISABLED
0
ADDITIONAL INFORMATION
strcpy 8C
execcmd 158
respawn 230
spawn 1B4
main 750
__start 8C

Symptom Data
REPORTABLE
1
INTERNAL ERROR
1
SYMPTOM CODE
PIDS/5765E6200 LVLS/520 PCSS/SPI2 FLDS/init SIG/11 FLDS/strcpy VALU/8c FLDS/respawn
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: A63BEB70

Date/Time: Wed Mar 7 15:22:20 NFT 2007
Sequence Number: 23091
Machine Id: 00CDC84C4C00
Node Id: UDWH01
Class: S
Type: PERM
Resource Name: SYSPROC

Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED

Probable Causes
SOFTWARE PROGRAM

User Causes
USER GENERATED SIGNAL

Recommended Actions
CORRECT THEN RETRY

Failure Causes
SOFTWARE PROGRAM

Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE

Detail Data
SIGNAL NUMBER
11
USER'S PROCESS ID:
1228974
FILE SYSTEM SERIAL NUMBER
1
INODE NUMBER
2
PROCESSOR ID
0
CORE FILE NAME
/core
PROGRAM NAME
init
STACK EXECUTION DISABLED
0
ADDITIONAL INFORMATION
strcpy 8C
execcmd 158
respawn 230
spawn 1B4
main 750
__start 8C

Symptom Data
REPORTABLE
1
INTERNAL ERROR
1
SYMPTOM CODE
PIDS/5765E6200 LVLS/520 PCSS/SPI2 FLDS/init SIG/11 FLDS/strcpy VALU/8c FLDS/respawn
---------------------------------------------------------------------------
LABEL: CORE_DUMP
IDENTIFIER: A63BEB70

Date/Time: Wed Mar 7 15:20:21 NFT 2007
Sequence Number: 23090
Machine Id: 00CDC84C4C00
Node Id: UDWH01
Class: S
Type: PERM
Resource Name: SYSPROC

Description
SOFTWARE PROGRAM ABNORMALLY TERMINATED

Probable Causes
SOFTWARE PROGRAM

User Causes
USER GENERATED SIGNAL

Recommended Actions
CORRECT THEN RETRY

Failure Causes
SOFTWARE PROGRAM

Recommended Actions
RERUN THE APPLICATION PROGRAM
IF PROBLEM PERSISTS THEN DO THE FOLLOWING
CONTACT APPROPRIATE SERVICE REPRESENTATIVE

Detail Data
SIGNAL NUMBER
11
USER'S PROCESS ID:
1831070
FILE SYSTEM SERIAL NUMBER
1
INODE NUMBER
2
PROCESSOR ID
2
CORE FILE NAME
/core
PROGRAM NAME
init
STACK EXECUTION DISABLED
0
ADDITIONAL INFORMATION
strcpy 8C
execcmd 158
respawn 230
spawn 1B4
main 750
__start 8C

Symptom Data
REPORTABLE
1
INTERNAL ERROR
1
SYMPTOM CODE
PIDS/5765E6200 LVLS/520 PCSS/SPI2 FLDS/init SIG/11 FLDS/strcpy VALU/8c FLDS/respawn
---------------------------------------------------------------------------



# lquerypv -h core 6b0 64
000006B0 7FFFFFFF FFFFFFFF 7FFFFFFF FFFFFFFF |................|
000006C0 00000000 000007D0 7FFFFFFF FFFFFFFF |................|
000006D0 00120000 2379A3F8 00000000 00000001 |....#y..........|
000006E0 696E6974 00000000 00000000 00000000 |init............|
000006F0 00000000 00000000 00000000 00000000 |................|
00000700 00000000 00000000 00000000 00000022 |..............."|
00000710 00000000 0000000A 00000000 00007FD1 |................|

 
Sort by date Sort by votes
go to this URL in the "search AIX Operating systems" search windo enter the program coring and the stack so for yours
init strcpy execmd respawn spawn main
If IBM has written an APAR to fix it then you will find the APAR number and an explaination like
on your search string I found APAR IY83230
if you can not find one and you do not know if the program coring is a system daemon, then call IBM's AIX support.

I could not find that APAR at the fixdist site for download
even though that defect was identified 2006 in March.
Call AIX support and have them cross-reference to a different APAR or have them give you an efix phone number is (in the USA) 1-800-426-73778 get AIX Support and ask for the KERN team
Cheers
 
Upvote 0 Downvote
Hi

Take a look at /usr/samples/findcore

With a little tweaking you can get this utility to react instantly to core dumps, by running "strings" against the core file, for instance, or moving the file to a designated location.

HTH

Kind Regards,
Matthew Bourne
"Find a job you love and never do a day's work in your life.
 
Upvote 0 Downvote
I use the following string to determine what program caused the core dump:

lquerypv -h core 6b0 64

Pete
 
Upvote 0 Downvote
I've submited this case to the AIX support team, and they said that "A programming error was found and will be corrected in a futur release", but they send me a copy of the EFIX "IY83230_42.060828.epkg.Z" and i installed it with "smitty emgr" and it's work but ,be carreful the installation of the EFIX cause an "halt q" on the server ...fortunately i've got hacmp !!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

msxi
  • Locked
  • Question
IBM AIX tcp port opens twice when initiating a connection as part of an interface
Replies
0
Views
56
msxi
msxi
wpdavids
  • Locked
  • Question
Updated Technology level from 5.3TL7 to 5.3TL12 & C program runs slow
Replies
1
Views
76
chgwhat
chgwhat
tlevasse
  • Locked
  • Question
HBA initialisation sequence directly in pt2pt in AIX 5
Replies
0
Views
56
tlevasse
tlevasse
madra
  • Locked
  • Question
nmon - swap-in & page-out - connection
Replies
0
Views
85
madra
madra
madra
  • Locked
  • Question
Firmware Upgrade - HMC & pSeries - which first ?
Replies
1
Views
59
chgwhat
chgwhat

Part and Inventory Search

Sponsor

Back
Top