2late4help
Technical User
hello all,
nice and needfull group!
so, we work with two 9400 as core, both switches config'd with mpla (with crossover-link between management-ports, igmp off, no trunks, default vlan, last sw-ver 3.05).
problem_1: both stacks reboot without we can detect some reason (no config changed, no problem with airconditon or something else, no new client). error-message in rebootlog is like 'assetation failure (at 0x..)'
problem_2: i cann't trap the core or use the web-interface, because no ip-address on the vlan. after configuration mpla, you can't any more select system or vlan as ip-device, it's automatic system. (it doesn't work to define the ip for the vlan before mpla - mpla delete any vlan).
how can i define the ip-address for the vlan?
thanks & best regards
Hans
nice and needfull group!
so, we work with two 9400 as core, both switches config'd with mpla (with crossover-link between management-ports, igmp off, no trunks, default vlan, last sw-ver 3.05).
problem_1: both stacks reboot without we can detect some reason (no config changed, no problem with airconditon or something else, no new client). error-message in rebootlog is like 'assetation failure (at 0x..)'
problem_2: i cann't trap the core or use the web-interface, because no ip-address on the vlan. after configuration mpla, you can't any more select system or vlan as ip-device, it's automatic system. (it doesn't work to define the ip for the vlan before mpla - mpla delete any vlan).
how can i define the ip-address for the vlan?
thanks & best regards
Hans