Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cordless Phone

Status
Not open for further replies.

radrman

MIS
Dec 14, 2003
66
US
Can any Analog Cordless phone be setup on a Call pickup group?
This Cordless phone has no hold or 2nd line.
If so how can I set it up.
 
shouldn't be any different to a standard analogue phone. as long as the cordless has a * & # button to access features & the hook switch timing fits that programmed in the M1
 
How is the *3 assigned to the analog phone.
Is there an rnp that needs to be assigned?
 
*3 is the default for RNP. you can change this if you want in LD57. If you want extns in a pickup group, you need to assign the same numerical value for the RNPG prompt in LD10/11 & set PUA in the CLS
 
While running the programming i was not allowed to insert an RNP.
I tested the pickup functionality but was not successful.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top