Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cordless / Basestation Info

Status
Not open for further replies.

nschreuder

IS-IT--Management
Jun 11, 2004
210
NL
Hai there,

Once i had a file containing explaination of LinkInfo (CS Rp SsQu T), FPInfo (Ss nRFP 0:xx......xx), RFPInfo (N Rp SsQu TB), SWLinkData on my cordless phone.
I lost that file [blush]

Is there anybody who can help me?

Thanks in advance.
 
Go In the DCA service mode:

There are diffrent ways for diffrent types of portables...

DT 368
Turn the portable OFF. Turn the portable ON again by pressing the keys <2>, <8> and <ON> at the same time, and keep them pressed until the portable is turned ON. The portable is now in service mode, and the R-state is shown for a few seconds. To access the DCA services, select Info and then DCA-Service from the menu,

DT 570
Turn the portable OFF. Turn the portable ON again by pressing the keys <2>, <8> and <ON> at the same time, and keep them pressed until the portable is turned ON. The portable is now in service mode, and the R-state is shown for a few seconds. To access the DCA services, select Info and then Service from the menu,

BR,
 
Thank you Singhbrindisi

I know how to get in DCA Service Mode, but i don't understand the info i see there.
What means CS, Rp, SsQu, T, and so on!

I had them all in a Word-document but that's gone.

Can i get it from one of you?

Thanks
 
DT290, DT368, DT570

nschreuder@planet.nl

[thumbsup2] Thanks [thumbsup2]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top