Copying old "F" keys amd mega Keys programing

[Dphone]

I had to install procomm on a replacement PC. I was wondering if someone could tell me which files the function keys and mega key program is in. I would like to replace the unprogrammed keys with the way my old procomm was programmed. I was hoping I could just replace file on the newly installed Procomm with my old programmed key without reprogramming each key.

 

[knob]

You will need to get the .key and .kbd files from your existing Procomm installation (default location is \Program Files\Symantec\Procomm Plus) and copy them to the new machine. You'll also likely need to tell Procomm to use those file in the Setup dialog. If you use the default metakey file, that will likely already be setup properly. For the keyboard mappings, select the Options | Data Options | Terminal Options menu item, make sure the right terminal emulation is selected, and choose the .kbd file in the drop down on the right side of the dialog.

http://www.aspectscripting.com

 

[Dphone]

Thanks for the help. I got what I needed. I also needed the "pw5.prm" file. I was not using the default meta keys.