copy vpn settings from linksys BEFSX41 to cisco 1811 through SDM

[marcoferr]

hello,
just installed my very first cisco 1811 through SDM, and have no problems.

I am trying to copy two vpn tunnel settings but I am having a really hard time between linksys info and cisco information. if I post the specs here would anyone be able to help?

Thanks.
Marcoferr

 

[burtsbees]

Yes. Post the specs.

Burt

 

[marcoferr]

Burt,
thanks so much for your reply. I will post a link with a snapshot of the linksys config file (vpn settings) plus phase1 and phase2 data...thanks again.

 

[marcoferr]

Burt,
I finally uploaded the screenshots I told you about:

here they are:

http://home.mindspring.com/~sfp01/cisco/

this is the picture of the first tunnel settings:
1 tunnel sergate.JPG

these are the phase 1 and 2 for the first tunnel:

2 tunnel sergate phase 1&2

this is the snapshot of the second tunnel:

3 tunnel tra.JPG

these are the phase 1 and 2 for the second tunnel:

4 tunnel tra phase 1&2

These are the screenshot I find in SDM...

screen 1.JPG
screen 2.JPG
screen 3.JPG
screen 4.JPG
screen 5.JPG
screen 6.JPG

I would truly appreciate if anyone could tell me how to set up these two VPNs correctly on the cisco1811, either via SDM or IOS.

Thanks Burt and anyone else who may wish to contribute.