Copy Button Programming

[mrh1912]

I have limited knowledge of programming these nortel phones, but when I do a button inquiry on the button that works is says "207 246 8450" I want to copy that functionality to several other available buttons on that same phone. What do I do?

Thanks in advance.

 

[allworxguy]

Norstar has no provision to copy buttons on the same phone.

Judging by your inquiry display this an external autodial. To recreate it else Dial F*2 > press the button you want program > and the enter the digits followed by "ok".

Marv

http://www.telemarv.ca

 

[mrh1912]

OK..so further investigation has revealed these buttons have LINES assigned to them. 207 is the Line. When I go through the programming I choose Terminal&Sets-->221-->User Preferences-->Button Programming--> I can see the correct Button as "B01:L207:2468450" that is what I need to do to B02, B03 and so on. Browsing through the programming selections on B02 don't show me anything obvious as to how to assign the line L207:2468450 to the button. Thoughts?

 

[jsaad]

I'm not sure about the L207 part.

To program an external speed dial:

Press Feature * 1 for external autodial
press the button
Dial the number
Press OK

 

[curlycord]

To assign lines Terms&Sets/XXX/LineAccess/LineAssignment and assign lines as desired.

You should be calling a tech in to program, cant be training on a forum.






=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[DigitelD]

It sounds like this:
L207 should be a target line and the numbers after it is the name. Go into Line Assignment and hit SCAN and when L207 comes up press SHOW and specify the number of appearances you want for that line.

SHK Certified (School of Hard Knocks)
NCSS, ATSP/IP

 

[DigitelD]

By the way, I am a strong advocate of calling in a tech to train you. It is worth the money.

SHK Certified (School of Hard Knocks)
NCSS, ATSP/IP