converting from ATT local to SBC (pac bell)

[GloriaE]

I have a Merlin legend realease 5.0 with a T1 from ATT local. is there anything I need to do in the software? Right now my framing is ESf,coding is B8ZS pluse typ is DTMF
I am thinking that all that needs to be done is to plug in the new SBC T1 into the CSU, I have a hardware tech going out and cross connecting to the new block. Is that all that needs to be don but to make sure that SBC is sending us the same thing that ATT local was?

 

[merlinman]

Kinda...

Make sure that SBC knows how your system is set up and that they can MATCH IT.

If you can make that happen, it will be a slam dunk.