convert incoming did to pri

[tangee]

I have a small switch that has DID trunks for incoming and I want to convert them to ISDN-PRI what hardware and software will be required to make this happen?

 

[jeter]

Are you saying that you want to insert the DID lines onto a PRI circuit? If so you will need a digital Truck card ( T1 card ). you will need a telephone switch that will handle a T1 card and DID trunks. You will need to set the lines for wink start and setup translation on the incomming 4 digits that follow the incomming calls.
“Reserve your right to think, for even to think wrongly is better than not to think at all”

Fisher CCNA

 

[tangee]

WANTED!!!! G3rv6 tapes! I am looking to purchase some tapes rather quickly. Does anyone know where I might purchase some of the Avaya tapes preferably J58890TF-1 L11 version? We are upgrading in a few weeks but need these tapes ASAP.

Thanks in advance.
We have tried Avaya already, but if you have any contacts I will try again.