Convert HEX Addr in BERR Message

[Lynx77]

Hi All,

Anyone knows how to convert the Addr field in BERR messages to locate the faulty board.

We are facing the following error:
BERR704 EXC 0: Bus Error in ISR SR=0x2511, PC=0x4212cbc, Addr=0x4212cbc, SSW=0x1468020
BERR007 CP BIC BERR: addr = 0x04212cbc;

It is an Option81C Rls25.40B.

BERR704 occured once then the system suffered from a warm start.

I found similar threads concerning other addresses:
Addr=0xb000c140: DCH on card 1 port 1
Addr=0x1310c3c0: device 15 in group 1
Addr=0xb000ca40: The address is cab 0 slot 10

However, I was not able to discover any pattern or a way to convert the addresses to physical locations.
Moreover, Addr could be software issue and does not match any board.

I tried ld 32 Conv with no success.

Any help?

Thanks.