Conversion Utility spreadsheet Question 2

[Trevor Stuart]

Conversion Utility
I have 2 questions regarding this utility.
1. I'm using PUTTY and I'm not sure how to disable BUG, TRF, and MTC. Is that done in Putty's config, or is that somewhere else? So far I haven't seen any of those in the print outs, but with the amount of data getting dumped I could easily miss them.

2. I'm not really sure what to do for the Meridian Networking section.The instructions in the spreadsheet reference LD 86, 87, and 90.
using that as my pointer I tried using the matching commands from

http://www.ghtrout.net/files/Print_Out_PBX.html

However the ld 90 is using Type ALL, which the spreadsheet says doesn't work. I don't think all the data is actually getting captured properly.
What are all the commands I need to run in order to capture all the information this particular spreadsheet is able to parse?


Using Conversion Utility - Version 2nd January 2018.

 

[Firebird Scrambler]

First of all the BUG . TRF, MTC etc are disabled in LD 17 against the ADAN TTY that you are using.

e.g. for TTY 0

>LD 17
REQ CHG
TYPE ADAN
ADAN CHG TTY 0
TTY_TYPE SDI
CAB
CARD
PORT
DES
FLOW
USER XMTC XSCH
TTYLOG
BANR

With regards to the networking capture data, please refer to the example attached here. Some of the output is different in the UK, but it should still get all the information that you need.

Remember to add in the USER values after you have finished capturing the data.


Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[AvayaHE]

Hello

That would have deterred you from wanting to see everything
if you want to see all the special issues:


ld 90

ESN000

MEM AVAIL: (U/P): 98038195 USED U P: 5240021 356725 TOT: 103634941
DISK SPACE NEEDED: 481 KBYTES
REQ prt

CUST 0

FEAT net

TRAN ac1

TYPE spn


SPN ENTER