Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Conversion of foxpro 2.6 to vfp 7.0
- Thread starter cyberwiz
- Start date
Data convertion shall not pose a problem. I am trying to view this as you require to recomiple the programe/codes of 2.6. As a code recompilation shall not also make any problem, once the copilation goes smooth. You should try to recompile all files inclusive of components.
However the problem lies in the behaviour pattern of the commands. There could be different way of functioning of some commands, whereas the intention at the 2.6 version level could be something else.
As always we feel, the best course shall be to re-code.
Best of luck
ramani :-9
(Subramanian.G)
FoxAcc
ramani_g@yahoo.com
However the problem lies in the behaviour pattern of the commands. There could be different way of functioning of some commands, whereas the intention at the 2.6 version level could be something else.
As always we feel, the best course shall be to re-code.
Best of luck
ramani :-9
(Subramanian.G)
FoxAcc
ramani_g@yahoo.com
- Status
