Hi,
Came across this information so thought I'd post it fully as some of you may wish to do this for your users!
Control Panel
module: CONTROL.EXE
command: rundll32.exe shell32.dll,Control_RunDLL
result: displays all the Control Panel icons in an Explorer view
----------------------
Accessibility Properties
module: ACCESS.CPL
command: rundll32.exe shell32.dll,Control_RunDLL access.cpl,,5
result: displays the Accessibility General properties
command: rundll32.exe shell32.dll,Control_RunDLL access.cpl,,1
result: displays the Accessibility Keyboard properties
command: rundll32.exe shell32.dll,Control_RunDLL access.cpl,,2
result: displays the Accessibility Sound properties
command: rundll32.exe shell32.dll,Control_RunDLL access.cpl,,3
result: displays the Accessibility Display properties
command: rundll32.exe shell32.dll,Control_RunDLL access.cpl,,4
result: displays the Accessibility Mouse properties
-------------------------
Add New Hardware Wizard
module: SYSDM.CPL
command: rundll32.exe shell32.dll,Control_RunDLL sysdm.cpl @1
result: runs the Add New Hardware wizard
---------------------------
Add New Printer Wizard
module: SHELL32.DLL
command: rundll32.exe shell32.dll,SHHelpShortcuts_RunDLL AddPrinter
result: runs the Add New Printer wizard
comments: Windows NT, it is possible to bring up a predefined Windows Dialog
box for connecting to a network printer - the ConnectToPrinterDlg API. However,
this dialog is not accessible by Visual Basic programs running under Windows
95. Therefore, you must use a Command line equivalent statement to invoke the
"Add Printer Wizard" under Windows 95 as detailed above. (KB article Q154007)
----------------------------------
Add/Remove Programs Property Page
module: APPWIZ.CPL
command: rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl,,1
result: displays the Install/Uninstall tab selected
command: rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl,,2
result: displays the Windows Setup tab selected
command: rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl,,3
result: displays the Startup Disk tab selected
-------------------------------
Briefcase
module: SYNCUI.DLL
command: rundll32.exe syncui.dll,Briefcase_Create
result: Creates a new Briefcase on the desktop
-----------------------------------------
Copy Disk Dialog
module: DISKCOPY.DLL
command: rundll32.exe diskcopy.dll,DiskCopyRunDll
result: displays the Copy Disk dialog for removable media
----------------------------------
Create New Shortcut
module: APPWIZ.CPL
command: rundll32.exe apwiz.cpl,NewLinkHere %1
result: Displays the Create New Shortcut dialog. Completing the filename in
the dialog creates a shortcut at the location specified by %1
---------------------------------
Date & Time Properties
module: TIMEDATE.CPL
command: rundll32.exe shell32.dll,Control_RunDLL timedate.cpl,,0
result: displays Set Date & Time properties tab
command: rundll32.exe shell32.dll,Control_RunDLL timedate.cpl,,1
result: displays the Time Zone properties tab
-----------------------------------------
Dial Up Networking (DUN)
module: RNAUI.DLL
command: rundll32.exe rnaui.dll,RnaDial {name of connection to establish}
result: displays the Connect To dialog for the passed connection. If
connected, displays the connection status dialog.
command: rundll32.exe rnaui.dll,RnaWizard
result: displays the Dial Up Networking Connection Wizard
-------------------------------------------
Display Options (Standard Windows Display Property Page*)
module: DESK.CPL
command: rundll32.exe shell32.dll,Control_RunDLL desk.cpl,,0
result: displays the Background tab selected
command: rundll32.exe shell32.dll,Control_RunDLL desk.cpl,,1
result: displays the Screen Saver tab selected
command: rundll32.exe shell32.dll,Control_RunDLL desk.cpl,,2
result: displays the Appearance tab selected
command: rundll32.exe shell32.dll,Control_RunDLL desk.cpl,,3
result: displays the Settings tab selected
comments: Note: Your video adapter may install other property pages into
DESK.CPL dynamically when selected with its own icon (i.e an ATI or Matrox
control panel icon). Additionally, it also may invoke its own control panel
applet mimicking the Windows display options.
----------------------------------------
Fonts
module: FINDFAST.CPL
command: rundll32.exe shell32.dll,Control_RunDLL findfast.cpl
result: displays the Office FindFast control panel applet (if installed)
---------------------------------------
Fonts
module: SHELL32.DLL
command: rundll32.exe shell32.dll,SHHelpShortcuts_RunDLL FontsFolder
result: displays the Fonts Folder in Explorer view
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @3
result: Also displays the Fonts Folder in Explorer view
---------------------------------------
Format Drive Dialog (floppy disk only)
module: SHELL32.DLL
command: rundll32.exe shell32.dll,SHFormatDrive
result: displays the floppy disk Format Drive dialog. Causes the Drive A to be
accessed on showing.
-------------------------------------
Game Controllers
module: JOY.CPL
command: rundll32.exe shell32.dll,Control_RunDLL joy.cpl,,0
result: displays the Game Controllers General property page
command: rundll32.exe shell32.dll,Control_RunDLL joy.cpl,,1
result: displays the Game Controllers Advanced property page
---------------------------------------
HTML
module: MSHTML.DLL
command: rundll32.exe mshtml.dll,PrintHTML (HTML doc to print)
result: sends the passed file to the printer
-------------------------------------
Internet Explorer 4 Control Panel
module: INETCPL.CPL
command: rundll32.exe shell32.dll,Control_RunDLL inetcpl.cpl
result: displays Internet Properties, General Tab
command: rundll32.exe shell32.dll,Control_RunDLL inetcpl.cpl,,0
result: displays Internet Properties, General Tab (same as above)
command: rundll32.exe shell32.dll,Control_RunDLL inetcpl.cpl,,1
result: displays Internet Properties, Security Tab
command: rundll32.exe shell32.dll,Control_RunDLL inetcpl.cpl,,2
result: displays Internet Properties, Content Tab
command: rundll32.exe shell32.dll,Control_RunDLL inetcpl.cpl,,3
result: displays the Internet Control Panel, Connection Tab
command: rundll32.exe shell32.dll,Control_RunDLL inetcpl.cpl,,4
result: displays the Internet Control Panel, Programs Tab
command: rundll32.exe shell32.dll,Control_RunDLL inetcpl.cpl,,5
result: displays the Internet Control Panel, Advanced Tab
-----------------------------------
Joystick Properties (also see Games)
module: JOY.CPL
command: rundll32.exe shell32.dll,Control_RunDLL joy.cpl
result: displays the Joystick property page
-----------------------------------------
Mail and Fax Options
module: MLCFG32.CPL
command: rundll32.exe shell32.dll,Control_RunDLL mlcfg32.cpl
result: displays the Microsoft Exchange Profiles general property page
-------------------------------------
Mail Postoffice Options
module: WGPOCPL.CPL
command: rundll32.exe shell32.dll,Control_RunDLL wgpocpl.cpl
result: displays the Microsoft Postoffice Workgroup Admin property page
-------------------------------
Main Group Options/Properties
module: MAIN.CPL
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @0
result: displays Mouse Properties
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @1
result: displays Keyboard Properties, Speed tab
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @1,,1
result: displays Keyboard Properties, Language tab
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @1,,2
result: displays Keyboard Properties, General tab
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @2
result: displays the Printers Folder (including Add Printer)
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @3
result: displays the Fonts Folder in Explorer view
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @4
result: displays Power Management Properties
-----------------------------------
Modem
module: MODEM.CPL
command: rundll32.exe shell32.dll,Control_RunDLL modem.cpl,,add
result: Runs the Add New Modem wizard
-----------------------------------
Multimedia & Sound Properties
module: MMSYS.CPL
command: rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl,,0
result: displays the Multimedia/Audio property page
command: rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl,,1
result: displays the Multimedia/Video property page
command: rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl,,2
result: displays the Multimedia/MIDI property page
command: rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl,,3
result: displays the Multimedia/CD Music property page
command: rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl,,4
result: displays the Multimedia/Advanced property page
command: rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl @1
result: displays the Sound Properties page
-----------------------------------------
Network Properties
module: NETCPL.CPL
command: rundll32.exe shell32.dll,Control_RunDLL netcpl.cpl
result: displays the Networks properties, Configuration tab
-----------------------------------
ODBC32 Data Source Administrator
module: ODBCCP32.CPL
command: rundll32.exe shell32.dll,Control_RunDLL odbccp32.cpl
result: displays the ODBC32 Data Source Administrator properties dialog
-------------------------------------
Open With
module: SHELL32.DLL
command: rundll32.exe shell32.dll,OpenAs_RunDLL {drive:\path\filename}
result: displays the application/file "Open With" dialog
result: passing the full file drive, path and name as a parameter will cause
the dialog to display the line "Click the program you want to use to open the
file '{filename}'".
--------------------------------------
Passwords Properties
module: PASSWORD.CPL
command: rundll32.exe shell32.dll,Control_RunDLL password.cpl
result: displays the Passwords properties, Change Passwords tab
-------------------------------------
Power Management Properties
module: POWERCFG.CPL
command: rundll32.exe shell32.dll,Control_RunDLL powercfg.cpl
result: displays the Power Management properties, Power Schemes tab
-------------------------------------------
Printer
module: SHELL32.DLL
command: rundll32.exe shell32.dll,SHHelpShortcuts_RunDLL PrintersFolder
result: displays the Printers Folder (including Add Printer)
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @2
result: Also displays the Printers Folder (including Add Printer)
-------------------------------------------
Regional Settings
module: INTL.CPL
command: rundll32.exe shell32.dll,Control_RunDLL intl.cpl,,0
result: displays the Regional Settings property page
command: rundll32.exe shell32.dll,Control_RunDLL intl.cpl,,1
result: displays the Numbers property page
command: rundll32.exe shell32.dll,Control_RunDLL intl.cpl,,2
result: displays the Currency property page
command: rundll32.exe shell32.dll,Control_RunDLL intl.cpl,,3
result: displays the Time property page
command: rundll32.exe shell32.dll,Control_RunDLL intl.cpl,,4
result: displays the Date property page
-------------------------------------------------------
Screen Saver Installation
module: APPWIZ.CPL
command: rundll32.exe desk.cpl,InstallScreenSaver c:\win\system\Flying
Windows.scr
result: Installs the new screen saver and runs the display/screen saver
preview property page
comments: Specify a valid path to the screen saver file to install. If you are
installing a new screen saver, first copy the screen saver file into the
\windows\system folder, then execute the above command. This will install the
specified saver as the current screen saver. It will not copy the file into the
windows\system folder. Replace the string above with the name of your actual
.scr file.
---------------------------------------------------
System Properties
module: SYSDM.CPL
command: rundll32.exe shell32.dll,Control_RunDLL sysdm.cpl,,0
result: displays the General property page
command: rundll32.exe shell32.dll,Control_RunDLL sysdm.cpl,,1
result: displays the Device Manager property page
command: rundll32.exe shell32.dll,Control_RunDLL sysdm.cpl,,2
result: displays the Hardware Profiles property page
command: rundll32.exe shell32.dll,Control_RunDLL sysdm.cpl,,3
result: displays the Performance property page
---------------------------------------------------
Shutdown
module: USER.EXE
command: rundll32.exe user.exe,restartwindows
result: forces Windows to perform a proper shutdown, and restart the computer
command: rundll32.exe user.exe,exitwindows
result: forces Windows to shutdown, and wait either to be turned off, or reset
--------------------------------------------------------------------------
Telephony Properties
module: TELEPHON.CPL
command: rundll32.exe shell32.dll,Control_RunDLL telephon.cpl users
result: displays the Dialing Properties dialog --------------------------------------------------
Themes
module: THEMES.CPL
command: rundll32.exe shell32.dll,Control_RunDLL themes.cpl
result: displays the Themes control panel app (if installed)
Came across this information so thought I'd post it fully as some of you may wish to do this for your users!
Control Panel
module: CONTROL.EXE
command: rundll32.exe shell32.dll,Control_RunDLL
result: displays all the Control Panel icons in an Explorer view
----------------------
Accessibility Properties
module: ACCESS.CPL
command: rundll32.exe shell32.dll,Control_RunDLL access.cpl,,5
result: displays the Accessibility General properties
command: rundll32.exe shell32.dll,Control_RunDLL access.cpl,,1
result: displays the Accessibility Keyboard properties
command: rundll32.exe shell32.dll,Control_RunDLL access.cpl,,2
result: displays the Accessibility Sound properties
command: rundll32.exe shell32.dll,Control_RunDLL access.cpl,,3
result: displays the Accessibility Display properties
command: rundll32.exe shell32.dll,Control_RunDLL access.cpl,,4
result: displays the Accessibility Mouse properties
-------------------------
Add New Hardware Wizard
module: SYSDM.CPL
command: rundll32.exe shell32.dll,Control_RunDLL sysdm.cpl @1
result: runs the Add New Hardware wizard
---------------------------
Add New Printer Wizard
module: SHELL32.DLL
command: rundll32.exe shell32.dll,SHHelpShortcuts_RunDLL AddPrinter
result: runs the Add New Printer wizard
comments: Windows NT, it is possible to bring up a predefined Windows Dialog
box for connecting to a network printer - the ConnectToPrinterDlg API. However,
this dialog is not accessible by Visual Basic programs running under Windows
95. Therefore, you must use a Command line equivalent statement to invoke the
"Add Printer Wizard" under Windows 95 as detailed above. (KB article Q154007)
----------------------------------
Add/Remove Programs Property Page
module: APPWIZ.CPL
command: rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl,,1
result: displays the Install/Uninstall tab selected
command: rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl,,2
result: displays the Windows Setup tab selected
command: rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl,,3
result: displays the Startup Disk tab selected
-------------------------------
Briefcase
module: SYNCUI.DLL
command: rundll32.exe syncui.dll,Briefcase_Create
result: Creates a new Briefcase on the desktop
-----------------------------------------
Copy Disk Dialog
module: DISKCOPY.DLL
command: rundll32.exe diskcopy.dll,DiskCopyRunDll
result: displays the Copy Disk dialog for removable media
----------------------------------
Create New Shortcut
module: APPWIZ.CPL
command: rundll32.exe apwiz.cpl,NewLinkHere %1
result: Displays the Create New Shortcut dialog. Completing the filename in
the dialog creates a shortcut at the location specified by %1
---------------------------------
Date & Time Properties
module: TIMEDATE.CPL
command: rundll32.exe shell32.dll,Control_RunDLL timedate.cpl,,0
result: displays Set Date & Time properties tab
command: rundll32.exe shell32.dll,Control_RunDLL timedate.cpl,,1
result: displays the Time Zone properties tab
-----------------------------------------
Dial Up Networking (DUN)
module: RNAUI.DLL
command: rundll32.exe rnaui.dll,RnaDial {name of connection to establish}
result: displays the Connect To dialog for the passed connection. If
connected, displays the connection status dialog.
command: rundll32.exe rnaui.dll,RnaWizard
result: displays the Dial Up Networking Connection Wizard
-------------------------------------------
Display Options (Standard Windows Display Property Page*)
module: DESK.CPL
command: rundll32.exe shell32.dll,Control_RunDLL desk.cpl,,0
result: displays the Background tab selected
command: rundll32.exe shell32.dll,Control_RunDLL desk.cpl,,1
result: displays the Screen Saver tab selected
command: rundll32.exe shell32.dll,Control_RunDLL desk.cpl,,2
result: displays the Appearance tab selected
command: rundll32.exe shell32.dll,Control_RunDLL desk.cpl,,3
result: displays the Settings tab selected
comments: Note: Your video adapter may install other property pages into
DESK.CPL dynamically when selected with its own icon (i.e an ATI or Matrox
control panel icon). Additionally, it also may invoke its own control panel
applet mimicking the Windows display options.
----------------------------------------
Fonts
module: FINDFAST.CPL
command: rundll32.exe shell32.dll,Control_RunDLL findfast.cpl
result: displays the Office FindFast control panel applet (if installed)
---------------------------------------
Fonts
module: SHELL32.DLL
command: rundll32.exe shell32.dll,SHHelpShortcuts_RunDLL FontsFolder
result: displays the Fonts Folder in Explorer view
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @3
result: Also displays the Fonts Folder in Explorer view
---------------------------------------
Format Drive Dialog (floppy disk only)
module: SHELL32.DLL
command: rundll32.exe shell32.dll,SHFormatDrive
result: displays the floppy disk Format Drive dialog. Causes the Drive A to be
accessed on showing.
-------------------------------------
Game Controllers
module: JOY.CPL
command: rundll32.exe shell32.dll,Control_RunDLL joy.cpl,,0
result: displays the Game Controllers General property page
command: rundll32.exe shell32.dll,Control_RunDLL joy.cpl,,1
result: displays the Game Controllers Advanced property page
---------------------------------------
HTML
module: MSHTML.DLL
command: rundll32.exe mshtml.dll,PrintHTML (HTML doc to print)
result: sends the passed file to the printer
-------------------------------------
Internet Explorer 4 Control Panel
module: INETCPL.CPL
command: rundll32.exe shell32.dll,Control_RunDLL inetcpl.cpl
result: displays Internet Properties, General Tab
command: rundll32.exe shell32.dll,Control_RunDLL inetcpl.cpl,,0
result: displays Internet Properties, General Tab (same as above)
command: rundll32.exe shell32.dll,Control_RunDLL inetcpl.cpl,,1
result: displays Internet Properties, Security Tab
command: rundll32.exe shell32.dll,Control_RunDLL inetcpl.cpl,,2
result: displays Internet Properties, Content Tab
command: rundll32.exe shell32.dll,Control_RunDLL inetcpl.cpl,,3
result: displays the Internet Control Panel, Connection Tab
command: rundll32.exe shell32.dll,Control_RunDLL inetcpl.cpl,,4
result: displays the Internet Control Panel, Programs Tab
command: rundll32.exe shell32.dll,Control_RunDLL inetcpl.cpl,,5
result: displays the Internet Control Panel, Advanced Tab
-----------------------------------
Joystick Properties (also see Games)
module: JOY.CPL
command: rundll32.exe shell32.dll,Control_RunDLL joy.cpl
result: displays the Joystick property page
-----------------------------------------
Mail and Fax Options
module: MLCFG32.CPL
command: rundll32.exe shell32.dll,Control_RunDLL mlcfg32.cpl
result: displays the Microsoft Exchange Profiles general property page
-------------------------------------
Mail Postoffice Options
module: WGPOCPL.CPL
command: rundll32.exe shell32.dll,Control_RunDLL wgpocpl.cpl
result: displays the Microsoft Postoffice Workgroup Admin property page
-------------------------------
Main Group Options/Properties
module: MAIN.CPL
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @0
result: displays Mouse Properties
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @1
result: displays Keyboard Properties, Speed tab
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @1,,1
result: displays Keyboard Properties, Language tab
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @1,,2
result: displays Keyboard Properties, General tab
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @2
result: displays the Printers Folder (including Add Printer)
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @3
result: displays the Fonts Folder in Explorer view
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @4
result: displays Power Management Properties
-----------------------------------
Modem
module: MODEM.CPL
command: rundll32.exe shell32.dll,Control_RunDLL modem.cpl,,add
result: Runs the Add New Modem wizard
-----------------------------------
Multimedia & Sound Properties
module: MMSYS.CPL
command: rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl,,0
result: displays the Multimedia/Audio property page
command: rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl,,1
result: displays the Multimedia/Video property page
command: rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl,,2
result: displays the Multimedia/MIDI property page
command: rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl,,3
result: displays the Multimedia/CD Music property page
command: rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl,,4
result: displays the Multimedia/Advanced property page
command: rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl @1
result: displays the Sound Properties page
-----------------------------------------
Network Properties
module: NETCPL.CPL
command: rundll32.exe shell32.dll,Control_RunDLL netcpl.cpl
result: displays the Networks properties, Configuration tab
-----------------------------------
ODBC32 Data Source Administrator
module: ODBCCP32.CPL
command: rundll32.exe shell32.dll,Control_RunDLL odbccp32.cpl
result: displays the ODBC32 Data Source Administrator properties dialog
-------------------------------------
Open With
module: SHELL32.DLL
command: rundll32.exe shell32.dll,OpenAs_RunDLL {drive:\path\filename}
result: displays the application/file "Open With" dialog
result: passing the full file drive, path and name as a parameter will cause
the dialog to display the line "Click the program you want to use to open the
file '{filename}'".
--------------------------------------
Passwords Properties
module: PASSWORD.CPL
command: rundll32.exe shell32.dll,Control_RunDLL password.cpl
result: displays the Passwords properties, Change Passwords tab
-------------------------------------
Power Management Properties
module: POWERCFG.CPL
command: rundll32.exe shell32.dll,Control_RunDLL powercfg.cpl
result: displays the Power Management properties, Power Schemes tab
-------------------------------------------
Printer
module: SHELL32.DLL
command: rundll32.exe shell32.dll,SHHelpShortcuts_RunDLL PrintersFolder
result: displays the Printers Folder (including Add Printer)
command: rundll32.exe shell32.dll,Control_RunDLL main.cpl @2
result: Also displays the Printers Folder (including Add Printer)
-------------------------------------------
Regional Settings
module: INTL.CPL
command: rundll32.exe shell32.dll,Control_RunDLL intl.cpl,,0
result: displays the Regional Settings property page
command: rundll32.exe shell32.dll,Control_RunDLL intl.cpl,,1
result: displays the Numbers property page
command: rundll32.exe shell32.dll,Control_RunDLL intl.cpl,,2
result: displays the Currency property page
command: rundll32.exe shell32.dll,Control_RunDLL intl.cpl,,3
result: displays the Time property page
command: rundll32.exe shell32.dll,Control_RunDLL intl.cpl,,4
result: displays the Date property page
-------------------------------------------------------
Screen Saver Installation
module: APPWIZ.CPL
command: rundll32.exe desk.cpl,InstallScreenSaver c:\win\system\Flying
Windows.scr
result: Installs the new screen saver and runs the display/screen saver
preview property page
comments: Specify a valid path to the screen saver file to install. If you are
installing a new screen saver, first copy the screen saver file into the
\windows\system folder, then execute the above command. This will install the
specified saver as the current screen saver. It will not copy the file into the
windows\system folder. Replace the string above with the name of your actual
.scr file.
---------------------------------------------------
System Properties
module: SYSDM.CPL
command: rundll32.exe shell32.dll,Control_RunDLL sysdm.cpl,,0
result: displays the General property page
command: rundll32.exe shell32.dll,Control_RunDLL sysdm.cpl,,1
result: displays the Device Manager property page
command: rundll32.exe shell32.dll,Control_RunDLL sysdm.cpl,,2
result: displays the Hardware Profiles property page
command: rundll32.exe shell32.dll,Control_RunDLL sysdm.cpl,,3
result: displays the Performance property page
---------------------------------------------------
Shutdown
module: USER.EXE
command: rundll32.exe user.exe,restartwindows
result: forces Windows to perform a proper shutdown, and restart the computer
command: rundll32.exe user.exe,exitwindows
result: forces Windows to shutdown, and wait either to be turned off, or reset
--------------------------------------------------------------------------
Telephony Properties
module: TELEPHON.CPL
command: rundll32.exe shell32.dll,Control_RunDLL telephon.cpl users
result: displays the Dialing Properties dialog --------------------------------------------------
Themes
module: THEMES.CPL
command: rundll32.exe shell32.dll,Control_RunDLL themes.cpl
result: displays the Themes control panel app (if installed)