LordGarfield
IS-IT--Management
Hi,
I have attached a pole display on the com2 port of a pc.
on com1 there is a thermal line printer.
the pole diplay is a SCD-400 of micronics.
Both devices are controlable by control codes.
I have the control codes for the printer and this one works fine.
But I do not have them for the pole display.
I need the control codes that do this stuff:
a initialization code
a clearing code (normaly it should be char(12) but that does not do the trick)
a code to print on the first line
a code to print on the second line.
I search everywhere on the internet but can't find the good codes. can anyone help me?
best regards
Roel.
I have attached a pole display on the com2 port of a pc.
on com1 there is a thermal line printer.
the pole diplay is a SCD-400 of micronics.
Both devices are controlable by control codes.
I have the control codes for the printer and this one works fine.
But I do not have them for the pole display.
I need the control codes that do this stuff:
a initialization code
a clearing code (normaly it should be char(12) but that does not do the trick)
a code to print on the first line
a code to print on the second line.
I search everywhere on the internet but can't find the good codes. can anyone help me?
best regards
Roel.