Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Contact closure adjunct

Status
Not open for further replies.

thejkro

Programmer
Jan 25, 2007
65
US
Does anyone know how to use the contact closure adjunct on a a G350? I know how to physically hook it up and I have the feature code programmed but what do I do after that?
 
there are 2 features codes "display features", page 1 & 2.

Contact Closure Open code: Close code:
and
Contact Closure pulse code:

You will also have to change the COS "change COS", and enable the COS of any telephones that want to use this feature, it is called "Contact Closure Activation" in the COS, stroke it to a "y" on any COS's for telephones that need access to the feature.

So you pick if you want it to work in open/close, or pulse mode, and you dial the feature code from a telephone with a COS enabled for "Contact Closure". that's all there is to it, I believe.


Mitch

AVAYA Certified Expert
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top