In the past with all video we were using ISDN BRIs from Local Telco Provider. Now we would like to start connecting through the PBX. We do know the video units in question can connect to the avaya PBX however the question is can anyone tell me what that configuration would look like. Do I need a BRI card or can you use Digital ports as Data Module extensions. Any information will be greatly appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Connecting Video Conferencing through Avaya 8700 1
- Thread starter ineedinfo
- Start date
-
1
- #2
phoneguy55
Programmer
one more thing: there are only a few providers who can pass 64K data calls (most voice is passed as 56K), they are: AT&T, Sprint, and possibly MCI. You must specify when you order/provision the ciruit you will be using 64K data on the circuit, and can their network pass those calls? You can't just use any schlock 3rd tier PRI provider for this, because, it just won't work.
mitch
AVAYA Certified Specialist
mitch
AVAYA Certified Specialist
captainnick666
Technical User
Also, is the video to be used off a gateway? if so, it will not work so well.
- Status
