Connecting to Nortel Switch ?

[billy1tech]

Trying to connect a swr2024 llinksys switch to a nortel 5510 using multiple VLANS

Connecting via fibre uplink ports - both ports are set to trunk mode

Created VLAN (1) default and VLAN (20) and put them both into trunk ports

Set (1) port in VLAN 1 and (1) port in VLAN 20 on both switches

I can communicate between both switches in VLAN 1 but cannot in VLAN 20 - have I missed something?

 

[SYQUEST]

Did you build a route to VLAN 20 and the reverse? Without a route it has no clue how to get there!

Is one of those devices a Layer 3 device?

....JIM....