Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations sizbut on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

connecting to magix

Status
Not open for further replies.
rileym24

rileym24

Programmer
May 2, 2006
1
CA
trying to connect to magix through 355 adapter won't log on, is there a setting in the com port area i need to change or in the software?
 
Sort by date Sort by votes
The WINSPM "SETTINGS" will walk you through the changes to your PC you need to make.

The Legend/Magix is set to go at 2400, N, 8 & 1.

Do not use a "NULL MODEM" cable.
 
Upvote 0 Downvote
just in case you didn't get this to work, I use a USB to 9 pin cable, a gender bender, and an RJ45 to 9 pin adapter with 9' cat 5 patch cord. No problem.
 
Upvote 0 Downvote
Can anyone provide me link for downloading free/ demo
spm software... i dont have any not able to buy from the vendor...

Regards
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

TrilokSingh
  • Locked
  • Question
MCK w/ Merlin Magix
Replies
1
Views
189
TouchToneTommy
TouchToneTommy
Jim E
  • Locked
  • Question
Merlin Magix and Merlin Legend DSS Console 1
Replies
5
Views
289
orion3311
orion3311
thephonelady
  • Locked
  • Question
Magix PRI down 2
Replies
3
Views
171
merlinman
merlinman
eibyer
  • Locked
  • Question
Connecting to Merlin Messaging
Replies
1
Views
100
budbyrd
budbyrd
techez
  • Locked
  • Question
Partner ACS call going to operator but does allow to leave a message then rings back to operator
Replies
1
Views
186
TouchToneTommy
TouchToneTommy

Part and Inventory Search

Sponsor

Back
Top