Connecting to Legacy Paging via FXO over ethernet network

[qtelcom]

Ip500v2 R10.1 and need to connect via FXO to a paging interface over the network. What product works well for this? Anything special on the IPO side? IP500v2<--FiberNetwork-->Legacy Paging FXO interface only.

I've used Patton ATA's for FXS stuff, but have never needed to do FXO over IP until now.

 

[kwing112000]

We have used some Valcom SIP paging devices. i also think algo may make some.

Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Vive Communications

 

[budbyrd]

We have used Multitech before as well. Just need a SIP end point license.

https://www.multitech.com/documents/publications/manuals/s000386_f.pdf

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'

 

[qtelcom]

Thanks for the ideas, I did some research on all of these. After speaking with Valcom, I'm looking at a Valcom-821A which will provide an FXO out. Anyone had any experience with Valcom-8xx series? I'm open to any other ideas. (Replacing their current paging system isn't feasible.)

IP500v2 >3rd Party SIP Extn registered to Valcom-821a >FXO out >Paging System FXO interface