Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

connecting to a remote site using the vpn client through my 837

Status
Not open for further replies.
baldingfast

baldingfast

Technical User
Jun 30, 2003
2
GB
Hi
As a nebbie I have managed to configure my 837 to allow vpn access to my lan, but I need to use the cisco vpn client on a machine ON my lan to access remote sites. so my questions are:-
1. Is it possible to configure the 837 to allow this and if so how do I go about it.
2. Failing that what other solutions are there.

I can connect to the other locations but no traffic passess through the tunnel.
I get the following output when I am connected:-

1d02h: %CRYPTO-4-RECVD_PKT_INV_SPI: decaps: rec'd IPSEC packet has invalid spi for destaddr= "my ip", prot=50, spi=0x71DAB340(1910158144), srcaddr= "remote ip"

I can see what is happenning (I think) but does anyone know a config change that will solve my problem.
Regards
John
 
Status
Not open for further replies.

Similar threads

Luzbel
  • Locked
  • Question
Connecting HVAC controller to network
Replies
0
Views
319
Luzbel
Luzbel
B
  • Question
Cisco IP phone 7841 8851 unable to forward all to external number
Replies
0
Views
115
badwolf1686
B
woza
  • Locked
  • Question
GNS3: Delete the lines "transport preferred none"
Replies
1
Views
400
DrB0b
DrB0b
Skip Rango
  • Locked
  • Question
how to backup cisco sg500-52p switch
Replies
1
Views
409
madwok
madwok
WinstonCH
  • Locked
  • Helpful tip
What is wrong with the diagram, there are people who will help to fix it? How do i do the configurat 1
Replies
1
Views
557
BIS
BIS

Part and Inventory Search

Sponsor

Back
Top