syndicate47
IS-IT--Management
Does anyone know how to connect an network printer. Printer is set up on an NT print server
Thanks
Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Connecting to a printer on an NT print server
- Thread starter syndicate47
- Start date
- Status
Ecaboodle
MIS
- Jan 22, 2001
- 516
You will need to install 'Services for Macintosh' on to the NT server. Only the Macs can't see the NT server other wise. You will also need at least one NTFS drive on the server. To do this.
Once this is done you should also be able to see the printers if they are sharing, by going to Chooser and selecting Laserwriter 8. You should then see the printer that is being shared by the NT server.
You will need to put the printer PPD file into the System Folder\Extensions\Printer Discriptions before going to chooser however.
This will allow the printer to set it's self correctly.
Once this is done you should also be able to see the printers if they are sharing, by going to Chooser and selecting Laserwriter 8. You should then see the printer that is being shared by the NT server.
You will need to put the printer PPD file into the System Folder\Extensions\Printer Discriptions before going to chooser however.
This will allow the printer to set it's self correctly.
- Status
Similar threads
- Locked
- Question
- Locked
- Question