Connecting to a NAM 4.0 for backup 1

[tjcom]

I have Norstar manager and when I open it up it ask's for the server name or IP address.

and administrator password ofcourse.

Can I connect to the Lan port on the NAM...and what is the NAM's default IP address?

Sorry don't have a manual, I inherited this site.

thanks!

 

[webephones]

192.168.110.10


If i lived in colorado i would be skiing already.But i dont so its a long 4 weeks till opening day.

 

[tjcom]

so all I have to do is connect my Laptop to the NAM ethernet port and setup my IP Adress to something like 192.168.110.12.....right?


thanks for your help

 

[webephones]

yup also same subnet 255.255.255.0"default"

If i lived in colorado i would be skiing already.But i dont so its a long 4 weeks till opening day.

 

[tjcom]

can I do a backup this way?

sorry for all the questions.

thanks

 

[tjcom]

I want to backup a NAM 4.0, do I need floppys?

or can I backup the LAN way?

thanks

 

[tjcom]

when backing up a NAM do I enter ACCESS2 and select backup?
if so, will it prompt me to insert a diskette after every section?

thanks

 

[curlycord]

To backup the NAM login to admin on the telset and then press 22 (Restore is 44 or 33).
It will ask you to insert disk then press OK.
At the end it will ask you to reinstall Disk one.

Access backup is to backup the Voice Channel keycodes.
Requires one disk.

 

[webephones]

also remember that access backup of voice channel key codes is nam specific...can use to restore only on the nam you backed up from

If i lived in colorado i would be skiing already.But i dont so its a long 4 weeks till opening day.

 

[tjcom]

curlycord,
you mean log into as F983?
Then Log:1020000
Then: 22?

Thanks

 

[tjcom]

would it be wise for me to go to F982 and set to answer lines to no?

then go to F983?

Thanks