miller3383
IS-IT--Management
Is it possible to log into a CS1000 for programming purposes through the Call Pilot server? Since they are both on the same network, it seems like that should work.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Connecting to a CS1000 for management puposes
- Thread starter miller3383
- Start date
- Status
I access the pbx through Element Manager, is that what you mean? I created an alias to the ip and named it cs1000 so now I can just go to I found it a little easier than the console for a lot of my needs.
- Thread starter
- #3
You'd think so, but these products aren't as integrated as you might think.
I assume you mean through the web interface and not the server.
From the Windows server console you could certainly telnet in or however you get to it. But not through the web interface.
I assume you mean through the web interface and not the server.
From the Windows server console you could certainly telnet in or however you get to it. But not through the web interface.
- Status
Similar threads
- Question