Hello PBX gurus, i have a client with two branch offices. One branch has KX-TES824 with 20 Extensions and the main office has 28 Extensions on the KX-TD1232. The two branches are 45KM apart and connected together over a wireless radio link (On the same LAN). Inter-branch communication is seeming to be expensive for them and they would like to have the two INTERCOM Networks integrated to become one.
This wouldn't have been a problem, the only challenge is i am not familiar with the old KX-TD1232 PABX system. I would like to put 4 Extensions on the KX-TD1232 in one group and assign an access code for them. How do i do this (Using both PT and PC Programming).
The free extensions on both sites are plugged into PSTN VoIP Gateways, and the gateways are connected to the LAN. Everything is set well just putting setting extensions on the KX-TD1232 and assigning an access code for them.
Hints are welcome. Especially assigning the access code
This wouldn't have been a problem, the only challenge is i am not familiar with the old KX-TD1232 PABX system. I would like to put 4 Extensions on the KX-TD1232 in one group and assign an access code for them. How do i do this (Using both PT and PC Programming).
The free extensions on both sites are plugged into PSTN VoIP Gateways, and the gateways are connected to the LAN. Everything is set well just putting setting extensions on the KX-TD1232 and assigning an access code for them.
Hints are welcome. Especially assigning the access code