Connecting KX-TD1232 to KX-TE824 over IP (Point to point) using a Gateway

[Wanet Telecoms Ltd]

Hello guys,
i just need a reminder on the KX-TD1232. I have not done PT Programming thing on KX-TD1232 (and it has no USB port)as i do most of my programming by PC. My scenario is, i have two sites. HQ (with KX-TD1232) and a branch office (with KX-TES824) 7KM apart with an existing point to point IP connectivity over radio(on the same LAN). The client wishes to have branch-to-branch voice communication over the same IP connection..

I need a configuration guide on how to achieve the below;
Setup 4CO Lines on the KX-TD1232 derived from 4FXS ports on the gateway to be automatically ceased (whichever is free)using an access code to call the other branch which has a KX-TES824.

The gateway has 4 FXO and 4FXS. Each branch has the same gateway.

Also anybody with knowledge on the Panasonic call progress tones (what voltage & freq?)

Thanks in advance.

 

[obtsystems]

For this to work you would need co ports and slt ports on each end, and would work but be very basic, I would not invest in voip fxs and fxo units and update the systems to NS series, the 1232 is well past its EOL