Connecting Cable between A Hipath 3800 and a M800 Median Gateway

[David E]

Can any one Help please. I Installed a new DIUT2 Board on a Siemens Hipath 3800 and try to connect it to a M800 Median Gateway.
What is the right Conneting Cable to use?
I tried to connect it using a DB15-to-RJ45 but still getting alarm on the M800 Gateway.
Can anyone help with some bright ideas...

 

[thepfy]

See [URL unfurl="true"]https://www.tek-tips.com/viewthread.cfm?qid=1725675[/url] for the Pin Out to check the mapping.