I´ve got a 51c and I want to install a 2.48Mbit (QPC536)DTI card, This Card needs a CC (QPC775C), the CC has to be install in slot 9 in the core/net shelf, But now in slot 9 there is a QSDI (QPC841C), can I move the QSDI card to another slot and where I programm the QSDI card (Or this card doesn´t require programming)
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Connecting a 2.048 Mbit DTI QPC536 Card on 51c
- Thread starter drbelloso
- Start date
the qsdi requires programming but, good news. it programs against the device number (interupt number) and that is a switch setting. just dis the card and move it, be sure it's in the same group.. otherwise you'll need to out the ports and put them back in the correct group
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
- Status
Similar threads
- Locked
- Question
