Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Connecting 2 US Robotics 2450 WAPs
- Thread starter PSLondon
- Start date
telcomwork
Technical User
Although I have never used the 2450's it is definitley possible from a technical standpoint and hardware isn't the limitating factor. Make sure distance limitaiton isn't a concern. Make sure your SSID are the same. Make sure the channels are setup for their own specific locations. Make sure WEP keys or whatever encrytion your using is configured properly. Make sure you are configuring a "Bridge" in the configuraation. Be sure the PC Cards are configured properly with the information you a re supplying on the AP's.... There are many options to check. but basically this should get you underway. Let me know if you have any problems. I have done many of these and will help with anything that I can.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question