Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Connecting 2 Option 11c Cabs via IP
- Thread starter merios
- Start date
- Thread starter
- #3
HOw about if I use 2 IP daughterboard cards (ntdk83)to connect them via IP . Cisco routers are on both sites connected via dedicated fiber and both sites have own connection to internet just in case.
I understand I will need at least 25.3 - anyone confirm this?
Also, that NTDK37DA is required - does anyone know if this is required in both cabs or?
I understand I will need at least 25.3 - anyone confirm this?
Also, that NTDK37DA is required - does anyone know if this is required in both cabs or?
- Thread starter
- #6
Has anyone actually gone ahead with setup?
What about the licencing?.. is it true you have to pay for Nortels to keycode 8 IP trunks at a time - even though in theory you could trunk over a thousand calls through 100 mb .. or have I got this wrong?
What about the licencing?.. is it true you have to pay for Nortels to keycode 8 IP trunks at a time - even though in theory you could trunk over a thousand calls through 100 mb .. or have I got this wrong?
- Status
Similar threads
- Locked
- Question
- Locked
- Question