Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connected but no response

Status
Not open for further replies.

tclin1998

Programmer
Oct 24, 2001
1
US
After I start a VPN section (using CISCO 5000)
from my Windows 98, I do

C:\WINDOWS> ping remote_workstation

Pinging XXX.com [192.168.0.71] with 32
bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.0.71:
Packets: Sent = 4, Received = 0, Lost = 4 (100%
loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms



What happened ?
There is no response if I do

telnet XXX.com

I also see a log message in VPN section:

----
10/20/2001 09:24:53 <Warning V The configuration
for
user tclin1998 on 206.171.22.5 does not local LAN to
be excluded from tunnel.
----

In the local PC &quot;advanced Login Properties&quot; I set

ON Tunnel IP
OFF Tunnel MS Networking(NetBT)
OFF Tunel IPX
ON Exclude Local LAN from Tunnel
ON Exclude DHCP(bootp) from Tunel
( If I set both
Exclude Local LAN from Tunnel
and Exclude DHCP(bootp) OFF, ping
still has no response)


My PC is on a local network ( sharing an IP with
the other PC)

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top