Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

//connect wizard fails at assign profile phase

Status
Not open for further replies.

LRB45

Programmer
Oct 5, 2005
157
US
We are doing a migration for sbs2003 to sbs 2011 standard. Everything went well except for 2 PC which are failing at the "assign User" part of the connect wizard. I've searched for the last 2 days and can't find anything definitive for a reason.
They only have one network adapter installed, ipconfig/ all shows the correct primary dns and the new dhcp & dns server. The user account has full admin rights and it is still failing. I have also verified that all firewalls are off, and any AV/ spam programs are disabled.
I tried to look at the connectcomputer logs but still don't see a specific item that is causing this.

Any ideas what else it could be? The wizard just return a "general access denied" error.
 
What does the event logs on both the workstation and server say?

ACSS - SME
General Geek



1832163.png
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top