Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CONNECT WITH CALLPILOT
- Thread starter crabhoe
- Start date
totaletech
IS-IT--Management
At the very least you need a PC with an Ethernet card.
A crossover ethernet Cable (Not a regular patch cord)
Then you can add mailboxes using your web browser.
The default IP for CP is 192.168.110.10. You need to make sure that your TCP/IP properties under network neighbourhood are set to an IP within that range. Set it to something like 192.168.110.99.
Once you have set that, go to Internet Explorer or Netscape and type 192.168.110.10 in the address bar.
Hope this helps.
A crossover ethernet Cable (Not a regular patch cord)
Then you can add mailboxes using your web browser.
The default IP for CP is 192.168.110.10. You need to make sure that your TCP/IP properties under network neighbourhood are set to an IP within that range. Set it to something like 192.168.110.99.
Once you have set that, go to Internet Explorer or Netscape and type 192.168.110.10 in the address bar.
Hope this helps.
- Status
Similar threads
- Locked
- Question