Connect to Exchange server from the internet.

[Dimpa1]

Hello,
I have an exchange server on my internal network 10.0.2.1 and I translate it to 222.1.1.1 on my pix firewall and also created an access-list to open up a certain host to be able to access the exchange server from the internet.

I am using an air-card to connect to the internet. And have configure outlook to use the public address and I cannot connect, outlook says 'disconnected' at the bottom. Is this suppose to work?

What can I do so users on the internet can use outlook to connect to my exchange server.

This is not what I want to do, but it is requested temparily until we get our office up and running again. (We got hit by Hurricane Rita)

Thanks,
Dimpal

 

[Marcs41]

Safest route for you now would be a VPN. Though, that is not a quick setup.
I would suggest you open up for OWA, or IMAP if they must use Outlook.

Marc
[sub]If 'something' 'somewhere' gives 'some' error, expect random guesses or no replies at all.
Free Tip: The F1 Key does NOT destroy your PC![/sub]

Have a look at the shop @

http://www.cafepress.com/tektips

!