Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connect remote sites via mGRE and IP/SEC VPN should I use BGP, OSPF or IEGRP

Status
Not open for further replies.
MyEyesAreBurning

MyEyesAreBurning

IS-IT--Management
Jul 13, 2006
55
0
0
US
need to connect remote sites via mGRE and IP/SEC VPN should I use BGP, OSPF or IEGRP for routing.
I need some direction here... not very good with Cisco. I was told that I need to use BGP if accessing the internet.

1. What protocol should I use to route from a hub site to a remote site?

Thanks,
DZ


 
Status
Not open for further replies.

Similar threads

Pankaj88
  • Locked
  • Question
BGP Routing Clarification
Replies
0
Views
55
Pankaj88
Pankaj88
PThomp3344
  • Locked
  • Question
Trying to connect to Cisco Unified Controller web interface: UC520W-16U-4FXO-K9
Replies
1
Views
90
bdk76
bdk76
testman1
  • Locked
  • Question
SIP telephone ring on second call
Replies
0
Views
66
testman1
testman1
Luzbel
  • Locked
  • Question
Connecting HVAC controller to network
Replies
0
Views
71
Luzbel
Luzbel
quazimotto
  • Locked
  • Question
Cisco ASA_5505 VPN to Juniper_SRX210 VPN IS UP_ No Traffic!!!!!!
Replies
0
Views
37
quazimotto
quazimotto

Part and Inventory Search

Sponsor

Back
Top