Connect NokiaPremicell to MD110

[XCatalin]

I have some GSM interface (NokiaPremicell and Nokia22) and I want to connect to MD110. How could do this? I must use LCR commands?

 

[Avstral]

Going to connect almost any EXTERNAL equipment to MD110, you have to use some signalisation method between this equipment and MD.

Both physical connection and signalisation could be analog or digital.

Having basic info about interface & signaling type realized on your external device, you can chouse appropriate board type in MD, define which program unit you need and make programming for incoming/outgoing route.

You are to use NA-commands to expand your numeration plan (add some access code) and RO-commands to program all the interface parameters and connect hardware equipment.

If you never did this before, it could be rather complicated and you will need some more experience person on site to help with.

Regards

 

[mduser]

In the past we used the Nokia Premicell. We connected it on a TLU-75/1 to the MD110. As we don't use it anby more I can't see the route parameters (ROCAI/RODAI) anymore. It was an external route with a route access code (DEST). LCR is optional to use.

At this moment we use the AS522 GSM Gateway which is connected to the Md110 (Bc10) over an TLU79 board (ISDN 2B+D) ... for info look at

http://www.mcs-nl.com/as520_uk.htm

Route settings:
ROCAI:ROU=...,TRM=5,SEL=711000000000001,SIG=511100000030,SERV=3101000001,TRAF=00151515,BCAP=111111;
RODAI:ROU=...,VARC=00000344,VARI=10030000,VARO=44310000,TYPE=SL60;
ROEQI:ROU=...,TRU=1-1&1-2,EQU=...-.-..-0;

 

[Okoskata]

We are currently using 3 Nokia Premicells, with the following settings:
ROCAI:ROU=...,TRM=3,SEL=013000000000001,SIG=110100000000,SERV=2100030000,TRAF=00151513,BCAP=111110;
RODAI:ROU=...,VARC=00000100,VARI=00000002,VARO=00000009,TYPE=TL1;