Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

connect ipoffice 8 (44) and bcm 400 v3.7

Status
Not open for further replies.

t342

Technical User
Feb 25, 2010
46
PA
Hi

I tried to connect ipoffice and bcm 400.

i have 8 network license in ipoffice and bcm hv 8 voip lines.

now i can call from ipoffice to bcm400 3.7.

but from ipoffice to bcm is not working (user busy 17).

 
How are your trunks programmed on the ipoffice and bcm?
Can you print out and paste them so we can look at the trunk programming.
 
you cannot connect the two

you need to upgrade bcm to bcm450 6.0

from there you will need mcdn licensing in the bcm and sip trunk and network licenses in the ipo
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top