Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connect HP Tape Drive to T1000

Status
Not open for further replies.

SunGee

MIS
Sep 30, 2009
1
US
I currently have 4 T1000 servers and trying to connect an HP StorageWorks Ultrium 448 Tape Drive. My goal is to link the tape drive to all 4 servers. What configuration would be best so I can use the tape drive for all 4 servers or would I have to connect to one server and try to point the backups through that server.
 
Have a look at Symantics Veritas... With the proper licenses, you will use one of your servers as a Media Server and back up all 4 servers to one tape drive.
 
I think you mean Symantec (once-was-Veritas) NetBackup?

Consider also open-source alternatives such as Bacula for network backup; I use it at home and am very impressed.

But is your question more about software? Or more about physically connecting up the tape drive? Do you have a SAN?

Annihilannic.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top