connect a Polycom IP 7000 conference phone to BCM 50 rv3

[SRC1]

I have a customer who whats to connect a Polycom IP 7000 conference phone. So far all I found is as long as it is v3. Please verify if possible if any of you have done this or if my imfo is correct. Thanks in advance

 

[ECartman]

Not possible, as far as I know anyways.

 

[phoneguy610]

if it is a sip unit then i believe rls 5 is where you need to be at

the analog polycoms and the digital ones made for nortel will work no problem with any release

 

[Khosher]

BCM does not support SIP endpoints/extensions on any release.

Only Nortel IP2033 conference unit will connect via IP.

Ternate sly use analogue or digital models as mentions in the last post