CONN1 Mobo wiring any-one???????

[johno5]

I'm new to PC building and have got stuck please help me!!!
Everything is connected apart from my -
Power LED
Keylock
Reset Switch
Power Button
Speakers &
HDD LED.

for my CONN1 connecter on my PC133 M758+ (Socket 370) motherboard.
I know which leads go where on the socket the only thing I'm concerned about is the colours of the wires surly it must matter which colour wire goes onto which pin.

Power LED wires = Red Black.
Keylock wires = ?????????
Reset Switch wires = Red White
Power Button wires = Green Black
Speakers & wires = Black Red
HDD LED. wires = Green White.

Please help which colour wire to which pin???????????????

 

[edfair]

Would suggest first try that white or black go closest to edge of board. Speaker, reset, and power don't matter. Power and keylock should be part of a 5 pin set, speaker 4 pin set.
If power and HDD don't work , reverse them. Nothing you can do can create much problem. Keylock can lock the machine up, you can leave it loose. Ed Fair
efair@atlnet.com

Any advice I give is my best judgement based on my interpretation of the facts you supply.

Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.