Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

conflicts ->Dual Fifo

Status
Not open for further replies.

Guest_imported

New member
Jan 1, 1970
0
This has to be one of the most annoying error messages, well one of them. In the the device manager the device Primary IDE Controller dual fifo is conflicting ( in the yellow exclimation). Should i reload the driver for that again? what do you suggest????
 
What O/s, CPU, mobo are you running?

Have you tried getting the latest driver from your motherboard's manufacturer?
 
Ignore the sucker. Every system I've built in the last 3 years has it. Ed Fair
efair@atlnet.com

Any advice I give is my best judgement based on my interpretation of the facts you supply.

Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.

 
do you have anything under unknown devices in device mangler? like maybe PCI bridge, if you do you need to install the PCI bridge for the motherboard, in turn this will sort the FIFO .

Rob If in doubt get the Ball Pein Hammer out
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top